Start by powering off your machine and unplug from the outlet. To avoid burning yourself, wait an hour before proceeding. For this procedure you will need a 3mm allen key.

  1. Begin by removing the cup warming tray located on the top of the machine.
  2. Utilize the 3mm Allen key to take out the four screws securing the top panel. Set the top panel aside once removed.
  3. Gently tip the machine onto its back, identifying and removing the screws. Loosen the screws to facilitate the sliding out of the panels.
  4. Return the machine to an upright position. Loosen the two screws at the top of the front panel on either side.
  5. With the last screws loosened, the panels should slide downward and then away from the machine.
  6. Before fully removing the panels, ensure you disconnect the rear LED panel by unplugging the small black connector.